DOD Contract : SPM7LX10D9006 | SPM7LX-10-D-9006

Federal Supply Classes for SPM7LX10D9006

2590 - Miscellaneous Vehicular Components

Includes: Includes Attachments for Tanks, Self-propelled Weapons, and High Speed Tractors; A-frames and Winches specifically designed for truck mounting; Cranes and Crane Booms for Wrecker Trucks.

2805 - Gasoline Reciprocating Engines, Except Aircraft; and Components

Includes: Includes Gas Reciprocating Engines; All Gasoline Reciprocating Engines except Aircraft Prime Moving.

Excludes: Excludes Engine Accessories (FSC 2990).

2815 - Diesel Engines and Components

Includes: Includes Automotive, Industrial, Marine, Locomotive, and all other types of Diesel and Semi-Diesel Engines.

Excludes: Excludes Engines Accessories (FSC 2990).

3040 - Miscellaneous Power Transmission Equipment

Includes: Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

3120 - Bearings, Plain, Unmounted

Includes: Includes Sleeve Bearings; Split Bearings; Washer Type Bearings; Jewel Bearings.

Excludes: Excludes Antifriction Bearings (FSC 3110); Mounted Bearings (FSC 3130).

Note: Note-Bearings in this class are generally one piece that retain and position moving and/or rotating parts. They may have lubrication grooves/fittings/facilities or include pre-lubrication.

4720 - Hose and Flexible Tubing

Includes: Includes Air Duct, Metallic, Nonmetallic, and Textile Fiber Hoses and their assemblies; Flexible Tubing and their assemblies.

Excludes: Excludes Conduit and their assemblies (FSC 5975); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515); Rigid Tubing and their assemblies (FSC 4710).

4730 - Hose, Pipe, Tube, Lubrication, and Railing Fittings

Includes: Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes: Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

5305 - Screws

Includes:

5306 - Bolts

Includes:

5307 - Studs

Includes:

5310 - Nuts and Washers

Includes: Includes Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes: Excludes Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Note: Note-Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

5315 - Nails, Machine Keys, and Pins

Includes: Includes Dowel Pins, Split Pins; Spikes; Tacks; Nonoffice Type Staples; Machine Keys; Brads; Shouldered Pins; Cotter Pins; Nails.

Excludes: Excludes Shafts (FSC 3040); Lock Keys (FSC 5340).

Note: Note-Nails, machine keys, and pins, including specially designed, will be classified in this FSC. a. Nails are slender, usually pointed fasteners with a head, and designed for insertion by impact. b. Machine keys are items generally inserted between two items, usually in a groove, to prevent relative rotation e.g., shaft and hub. c. Pins are cylindrical items of various materials used to align/attach two or more parts together and may allow for angular movement.

5320 - Rivets

Includes:

5325 - Fastening Devices

Includes: Includes Eyelets; Grommets; Aircraft Cowling Fasteners; Textile Fasteners; Retaining Rings; Threaded Inserts.

5330 - Packing and Gasket Materials

Includes: Includes General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes: Excludes O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV, Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Note: Note-This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets, and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

5331 - O-Ring

Includes:

Excludes: Excludes Packing and Gasket Material (FSC 5330).

5340 - Hardware, Commercial

Includes: Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes: Excludes Weapons System Hardware (FSC 5342).

Note: Note-Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

5342 - Hardware, Weapon System

Includes: Includes Adapters; Anchor Plates and Straps; Anodes; Bellows; Couplings; Control Rods; Access Doors; Fairleads; Mounts; Tie Rods; Yokes.

Excludes: Excludes Commercial Hardware (FSC 5340).

Note: Note-Hardware designed for weapon systems unique applications will be classified in this FSC.

5360 - Coil, Flat, Leaf, and Wire Springs

Includes: Includes Compression Springs; Torsion Springs; Leaf Spring Assemblies; Flat Springs; Extension Springs.

Note: Note-All springs, including specially designed, will be classified in this FSC. A spring is an elastic mechanical device that regains its original shape after being compressed, extended or deflected.

5365 - Bushings, Rings, Shims, and Spacers

Includes: Includes Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes: Excludes Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Note: Note-All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

5805 - Telephone and Telegraph Equipment

Includes:

5855 - Night Vision Equipment, Emitted and Reflected Radiation

Includes: Includes Sighting and Observation Devices, Target Detectors and Locators, Remote Viewing Systems utilizing heat radiation emitted from object(s), associated Radiation Sources, Image Converters and Image Intensifiers, Optical Cells and other components designed for Night Vision Equipment. Holders and Lens used with Infrared Equipment are also included in this FSC.

Excludes: Excludes Optical Sighting devices which incorporate both day and night viewing characteristics within an integral unit for fire control purpose, nonnight vision type items designed for use with guided missiles, communications, or laboratory equipment, and Optical Elements, such as Lens, Prisms, Windows.

Note: Note-This class includes image forming devices and associated aids, their subassemblies and components, utilizing passive and/or active techniques for detection, observation, and identification of terrain and objects at night, while maintaining concealment afforded by darkness. Includes items having multiapplication for purposes of fire control, and/or night observation, and/or detection. Excluded from this class are items for which more specific classifications are suitable as prescribed by the structure and indexes of the FSC.

5930 - Switches

Includes: Includes Rotary, Knife, Toggle, Push Button, Mercury, Thermostatic, and Differential Pressure Switches.

Excludes: Excludes Switchgear.

8415 - Clothing, Special Purpose

Includes: Includes Special Purpose Headwear, including Helmets, except Ballistic Protective; Safety and Protective Clothing; Athletic Clothing; Safety, Combat, Protective, and Work Gloves; Submarine Deck Exposure Clothing; Flight Clothing Components designed for use with both Specialized and Conventional Ensembles.

Excludes: Excludes Sporting and Athletic Gloves; Athletic Footwear; Safety Footwear; Personal Armor; Special Hospital and Surgical Clothing. Excludes special purpose clothing wherein the primary purpose is ballistic resistant protection. This class will include common use components of both ballistic and conventional end items.

Note: Note-This class includes conventional winter, summer, and intermediate flight clothing ensembles and their components. Excluded from this class are specialized antiexposure, antigravity, partial pressure, and full pressure, flight ensembles and their specialized components.

9390 - Miscellaneous Fabricated Nonmetallic Materials

Includes: Includes Cork Fabricated Basic Materials; Asbestos Fabricated Materials; Manufactured Mica; Minerals for scientific and technical use (cut but not mounted); Pottery Supplies; Catgut and Wormgut; Vegetable Brush Fibers; Bagasse.

9905 - Signs, Advertising Displays, and Identification Plates

Includes: Includes Electric Signs; Sign Boards; Display Stands; Mannequins and other display forms; Printed Signs; General Purpose Identification Tags and Blanks, Nonpersonal; Plates and Tags for specific applications.

U009 - Education Services