DOD Contract : N0038305G056B | N00383-05-G-056B

Federal Supply Classes for N0038305G056B

1095 - Miscellaneous Weapons

Includes: Includes Line Throwing Guns; Catapult Guns; Bayonets; Saluting Guns; Signal Guns; Flare Guns; Barrage Balloons; Accessories, not elsewhere classifiable, for weapons in this group; Expendable Bomb Dispensers.

1560 - Airframe Structural Components

Includes: Includes Flight Control Surfaces; Internal and External Auxiliary Fuel Tanks; Exhaust Systems; Pylons, Trim Tabs; Aircraft.

Excludes: Excludes Fitted Covers; Helicopter Rotor Brake System Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the aircraft.

Note: Note-This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.

1620 - Aircraft Landing Gear Components

Includes: Includes Shock Struts and Components; Installation Elements, such as Torsion Bars, Vibration Links, Drag Struts; Landing Gear Trunions, Axles and Shimmy Dampeners; Specially designed hydraulic power steering system components.

Excludes: Excludes Mounting Braces and Mounting Plates permanently installed on aircraft (FSC 1680); Landing Wheels, Skis, and Floats (FSC 1630); Wheel Brakes and Wheel Brake Cylinders (FSC 1630).

1650 - Aircraft Hydraulic, Vacuum, and De-icing System Components

Includes: Includes Hydraulic and Pneumatic Accumulators, Pumps, Motors, Actuating Cylinders, and Filters; De-icing Boots; Fluid Type De-icing Pumps, Valves and Filters; Vacuum System Oil Separators; Pneumatic Pressurization Equipment other than that for pressurizing cabins and compartments.

Excludes: Excludes Jet Engine Hydraulic Components (FSC 2840); Valves specifically designed for air conditioning, heating, ventilating, cabin pressurizing, and thermal de-icing (FSC 1660); Valves specifically designed for use with Aircraft Engines (FSC 2840); Guided Missiles and Guided Missile Engines (FSC 1338), Landing Gear (FSC 1620), Wheel and Brake System Components (FSC 1630); Oxygen Breathing System Components (FSC 1660); In-flight Refueling System Hydraulic components (FSC 1680); Specifically designed hydraulic power steering system components (FSC 1620).

Note: Note-This class includes only those components specifically designed for aircraft use.

1660 - Aircraft Air Conditioning, Heating, and Pressurizing Equipment

Includes: Includes Cabin Supercharging Equipment; Canisters; Cylinder Assemblies; Masks; Fixed Oxygen System; Specially Designed Aircraft Valves; Cabin Pressure Regulators; Heat Exchangers; Air Expansion Turbines; Aircraft Heaters; Ventilating System Components; Air Conditioning and Heating Duct Assemblies; Thermal De-icing Equipment; Cabin and Compartment Pressurizing Equipment; Air Diffusers; Cabin Pressure Selectors; Liquid Oxygen Converters.

Excludes: Excludes Oxygen Pressure Signals and Warning Devices; Tubing; Ground Type Heaters and Coolers; Pressurizing Equipment other than that used for Cabin and Compartment Pressurization; Fluid De-icing Equipment; Valves specifically designed for use with Aircraft Engines, Guided Missiles, and Guided Missile Engines.

Note: Note-This class includes components specifically designed for use in aircraft air conditioning, heating, and pressurizing equipment. Also included are specially designed components of oxygen breathing systems used in aircraft.

1680 - Miscellaneous Aircraft Accessories and Components

Includes: Includes Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp stowed on board; Cockpit Mounted Control Quadrants; Actuators, Electro-Mechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports;Electric Windshield Wipers;Aircraft Onboard Inert Gas Generators;Aircraft Furniture;Aircraft Mounted Winches and Hoists;In-Flight Refueling System Components, including Fuel Components;Aircraft Curtains;Cable Tension Regulators;Sun Visors;Rear-View Mirrors;Mechanical Transmissions, Gearboxes and Constant Speed drives Specially designed for aircraft.

Excludes: Excludes Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Roter Brake System Components; Helicopter Automatic Stabilization Equipment.

1730 - Aircraft Ground Servicing Equipment

Includes: Includes Energizers; Engine Preheaters; Mooring Assemblies; Wheel Chocks; Beaching Equipment; Aileron, Elevator, and Rudder Locks; Passenger Loading Ramps; Maintenance Platforms; Aircraft Maintenance and Boarding Ladders; Aircraft Maintenance Slings and Hoists; Aircraft Fin Tilting Jacks; Airfield Specialized Lift Trucks and Trailers; Fitted Covers for Airframe Components; Aircraft Engine Covers.

Excludes: Excludes Airfield Specialized Trucks and Trailers designed primarily for transporting aircraft assemblies (FSC 1740); Maintenance Stands designed for support of aircraft assemblies during repair or overhaul (FSC 4920); Test Stands (FSC 4920); General Purpose Jacks (FSC 5120); Slings (FSC 3940), and Hoists (FSC 3950); Trailers (FSC 2330), Liquid Oxygen, Aircraft Servicing (FSC 1660).

Note: Note-This class excludes "vehicular components" such as those listed under FSC's 2520, 2530, 2540, 2590.

2840 - Gas Turbines and Jet Engines, Aircraft, Prime Moving; and Components

Includes: Includes Compressor and Turbine Rotors; Blades; Combustion Chamber; Accessory Gear Box; Afterburner; Exhaust Cone; Reservoirs, Hydraulic; Tank, Oil.

Excludes: Excludes Oil, Air, Anti-icing, and Hydraulic Regulators, Valves, and Pumps specially designed for Gas Turbines and Jet Engines (FSC 2995); Control Assemblies, Push-Pull (FSC 2995); Engine Mounted Control Assemblies (FSC 2995); Fuel System Components (FSC 2915); Engine Electrical System Components (FSC 2925); Engine Cooling System Components (FSC 2935); Engine Air/Oil Cleaner/Filter/Strainers (FSC 2945).

Note: Note-Engines and Components classified in this FSC are intended for use as/on aircraft and/or guided missile prime movers.

3040 - Miscellaneous Power Transmission Equipment

Includes: Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

4330 - Centrifugals, Separators, and Pressure and Vacuum Filters

Includes:

Excludes: Excludes Laboratory Centrifuges (FSG 65 and 66); Water Purification Filters (FSC 4610).

4710 - Pipe, Tube and Rigid Tubing

Includes: Includes Culvert Pipes; Culvert Pipe Connector Bands; Metallic Pipes; Plastic Pipes; Tubes and Rigid Tubing and their assemblies.

Excludes: Excludes Air Conditioning-Heating Pipes (FSC 4520); Asbestos and Cement, Bituminized Fiber, Clay and Concrete Pipes (FSC 5630); Conduit Pipes and their assemblies (FSC 5975); Downspout Pipes (FSC 5670); Exhaust Pipes (FSC 1560, 2990, and 4520); Fire Extinguishing Systems Pipes and Tubes and their assemblies (FSC 4210); Flexible Tubing (FSC 4720); Glass Tubing (FSC 6640, and 9340); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515).

4920 - Aircraft Maintenance and Repair Shop Specialized Equipment

Includes: Includes Maintenance stands designed for support of aircraft assemblies during repair or overhaul; Test Stands and Test Equipment specially designed for maintenance and repair of aircraft components such as: engines, generators, hydraulic systems, armament, automatic pilot, fire control, flight control, and navigational systems.

Excludes: Excludes Hand Tools; Airfield Maintenance Platforms; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.

5306 - Bolts

Includes:

5310 - Nuts and Washers

Includes: Includes Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes: Excludes Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Note: Note-Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

5330 - Packing and Gasket Materials

Includes: Includes General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes: Excludes O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV, Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Note: Note-This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets, and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

5340 - Hardware, Commercial

Includes: Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes: Excludes Weapons System Hardware (FSC 5342).

Note: Note-Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

5342 - Hardware, Weapon System

Includes: Includes Adapters; Anchor Plates and Straps; Anodes; Bellows; Couplings; Control Rods; Access Doors; Fairleads; Mounts; Tie Rods; Yokes.

Excludes: Excludes Commercial Hardware (FSC 5340).

Note: Note-Hardware designed for weapon systems unique applications will be classified in this FSC.

5360 - Coil, Flat, Leaf, and Wire Springs

Includes: Includes Compression Springs; Torsion Springs; Leaf Spring Assemblies; Flat Springs; Extension Springs.

Note: Note-All springs, including specially designed, will be classified in this FSC. A spring is an elastic mechanical device that regains its original shape after being compressed, extended or deflected.

6610 - Flight Instruments

Includes: Includes Air Speed Indicators; Rate of Climb Indicators; Bank and Turn Indicators; Pitot Tubes; Gyro Horizon Indicators; Attitude Gyro Indicators.

Excludes: Excludes Navigational Instruments (FSC 6605).