DOD Contract : DAAJO993G0017 | DAAJO9-93-G-0017

Federal Supply Classes for DAAJO993G0017

1560 - Airframe Structural Components

Includes: Includes Flight Control Surfaces; Internal and External Auxiliary Fuel Tanks; Exhaust Systems; Pylons, Trim Tabs; Aircraft.

Excludes: Excludes Fitted Covers; Helicopter Rotor Brake System Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the aircraft.

Note: Note-This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.

2995 - Miscellaneous Engine Accessories, Aircraft

Includes: Includes Engine Dynafocal Suspension Mounts; Engine Cowling Mounts; Engine Mounted Control Assemblies; Pneumatic Starters; Push-Pull Control Assemblies;Specially designed Jet Engine Air, Oil, Anti-icing and Hydraulic Regulators; Valves and Pumps; Starting Units.

Excludes: Excludes Exhaust System; (FSC 1560); Jet Engine Hydraulic Reservoirs (FSC 2840); Jet Engine Oil Tanks (FSC 2840); Electrical Starters (FSC 2925); Cockpit Mounted Control Quadrants (FSC 1680); Aircraft Engine Covers (FSC 1730).

Note: Note-Items classified in this class must be specifically designed for use with aircraft or quided missile primemovers only.

4010 - Chain and Wire Rope

Includes: Includes Bead Chain; Weldless Chain; Single Leg Chain Assemblies; Wire Rope; Wire Cord; Single Leg Wire Assemblies.

Excludes: Excludes Power Transmission Chain (FSC 3020); Slings.

Note: Note-Chain and wire rope, with attachments or terminations will be classified in this class when they are for general use. a. Chain is a series of flexible links and/or rings fitted into one another used for supporting, lifting,restraining, dragging, or transmitting power. b. Wire rope is formed from strands of twisted wire.

5306 - Bolts

Includes:

5310 - Nuts and Washers

Includes: Includes Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes: Excludes Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Note: Note-Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

5340 - Hardware, Commercial

Includes: Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes: Excludes Weapons System Hardware (FSC 5342).

Note: Note-Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

5342 - Hardware, Weapon System

Includes: Includes Adapters; Anchor Plates and Straps; Anodes; Bellows; Couplings; Control Rods; Access Doors; Fairleads; Mounts; Tie Rods; Yokes.

Excludes: Excludes Commercial Hardware (FSC 5340).

Note: Note-Hardware designed for weapon systems unique applications will be classified in this FSC.

5365 - Bushings, Rings, Shims, and Spacers

Includes: Includes Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes: Excludes Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Note: Note-All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

5640 - Wallboard, Building Paper, and Thermal Insulation Materials

Includes: Includes Paper Building Board; Ceiling Board; Gypsum Board; Insulating Board; Plasterboard; Soundproofing Board; Tar Paper; Wallpaper; Mineral Wool; Glass Wool Batts; Pipe Covering.

Excludes: Excludes Electrical Insulation Materials.

5845 - Underwater Sound Equipment

Includes: Includes Sonar Equipment; Underwater Listening Equipment; Sonobuoys; Sonobuoy Launchers; Fathometers; Sofar Equipment.

Note: Note-This class excludes items specifically designed for fire control sonar systems.

5905 - Resistors

Includes: Includes Varistors; Resistive ballast Tubes; Rheostats; Resistor Networks; Resistor Mounting Hardware; Thermistors.

Excludes: Excludes Resistance Wire.

5915 - Filters and Networks

Includes:

Note: Note-This class includes those filters and networks which consist of a combination of resistors, capacitors, or coils, but not a combination of resistors only (classified in 5905), capacitors only (classified in 5910), or coils only (classified in 5950).

5995 - Cable, Cord, and Wire Assemblies: Communication Equipment

Includes:

Excludes: Excludes Cable Assemblies, Fiber Optic.

Note: Note-This class includes only those types of cable, cord, and Wire Assemblies and Sets (and Wiring Harnesses) used on or with equipment and components covered by Groups 58, 59 and 70. Cable, Cord, Wire Assemblies, and Sets (Wiring Harnesses) used on or with equipment classified in FSC Groups other than Groups 58, 59, or 70 are classified in FSC Class 6150 if multiapplication, or classified with the next higher classifiable assembly if specially designed.

6110 - Electrical Control Equipment

Includes: Includes Contactors; Motor Controllers; Power Servomechanisms; Switchgear; Voltage Regulators.

Excludes: Excludes Automatic Pilot Mechanisms; Relays; Resistors.